You are here:
News
News
Testing of Intrinsically safe barriers 2010-10-29
Test I.S. Barrier,How frequently should you test them?What is the testing procedure for one?No special maintenance of intrinsically safe systems is required.
Capacitor size for actuating two latching solenoids 2010-10-29
The datasheet does not give the DC coil resistance, but we measured it at 30R.The datasheet does not give the coil inductance.
Installation of control valve 2010-10-29
Some control valves, like Samson model 3241, strongly recommend that the pipeline upstream and downstream of the control valve should be straight and free of obstructions for a length of at least 6 ti
Specifying gas valves for wide duty range 2010-10-28
Where a valve is needed for regulating the pressure inside a process. The issue is that the pressure setpoint.Varies quite a lot. The valve(s) is installed downstream of the process, and the process i
Three Mile Island - Stuck open PORV 2010-10-28
There were human factors at play, but a critical pilot operated relief valve was also faulted. I've seen this noted in many reports as well as all over the net and unfortunately also Wikipedia which e
Contact corrosion stud-bolts/flanges 2010-10-28
About contact corrosion between the galvanised bolts-nuts-washers and the stainless steel flanges. Is it not neccesary to worry about this, or are measurements needed.
Stepper Motor operated valves and max. power 2010-10-28
What is the maximum power drawn by stepper motors in my system.The system is like a domestic shower, where valves in the hot and cold pipes are moved with stepper motors.
Solonoid valve -Inductance/Saturation Current/Initial current 2010-10-28
Here is a normally-closed solonoid valve (the 24VDC one) which i wish to use to keep open (or indeed closed) a pipe of water in a domestic household in UK,have many years experience in specifying and