Hot Product

Product drawing»

Structural drawing»

You are here:  

The valve mounted on the pipeline

2011-07-12

(1) The valve mounted on the pipeline. Valve can be installed in either end of the upstream side. Driven by the valve handle can be installed anywhere in the pipeline. But with a gear box or pneumatic drives pneumatic pipe valve should be installed upright, that is installed in horizontal pipelines, and the drive is pipelines top.
(2) Between the ball valve flange and pipe flange design by piping installed gasket.
(3) Bolts on the flange to be symmetric, successive, evenly tightened.
(4) Connect air line (pneumatic drive).
3, the inspection after installation
(1) Drive start operation, pneumatic pipe valve closed several times, should be flexible without Shies, confirmed it is working.
(2) Design requirements by pipeline and pneumatic pipe on the pipe between the valves sealing Flange for inspection.

 

MORE NEWS

  • Various types of dishes which can be heated
  • the difference is ball is a sphere
  • these two parts cooperate to control the relative
  • the smallest body cavity space
  • Shanghai MeiYan Yi Pump & Valve Co., Ltd.
    MeiYan Yi solenoid valve Contact MeiYan Yi
    Shanghai Enine Pump & Valve Co., Ltd.
    Enine solenoid valve Contact Enine
    Shanghai Saitai Pump & Valve CO., Lid.
    Saitai solenoid valve Contact Saitai
    Shanghai Fengqi Industrial Development Co., Ltd.
    FengQi solenoid valve Contact FengQi