Hot Product

Product drawing»

Structural drawing»

You are here:  

The pneumatic valve of the valve closure

2011-08-09

Pneumatic valve features:
Pneumatic valve is mainly used for cut off or connected to the line of medium, can also be used for fluid regulation and control, pneumatic valve and other valve types, compared with a rotary output torque, open the quick, smooth and reliable widely applicable, such as following advantages.
1, fluid resistance small, pneumatic ball valve of all categories of least resistance in a fluid, even reduced diameter pneumatic valve, the fluid resistance is quite small.
2, the stem thrust bearing reduces friction torque, smooth operation can stem the long-term flexibility.
3, the seat sealing performance, the use of Teflon and other seals made of elastic material, the structure easy to seal, and the pneumatic valve of the valve closure increased capacity with medium pressure increases.
4, stem seal, reliable, turning the stem only for transportation and do not do fake down movement, not easy to damage the valve stem packing seal, and sealing ability increased with the increase of the pressure medium.
5, the PTFE and other materials have good self-lubrication, the friction loss is small and the ball, so the pneumatic valve for long life.

 

 

MORE NEWS

  • Angel and the Shocker exacerbated
  • Driven by motor driving this butterfly valve
  • Basic series of liquid chlorine Q41F46 ball
  • The lifting pressure of the valve can vary from
  • Shanghai MeiYan Yi Pump & Valve Co., Ltd.
    MeiYan Yi solenoid valve Contact MeiYan Yi
    Shanghai Enine Pump & Valve Co., Ltd.
    Enine solenoid valve Contact Enine
    Shanghai Saitai Pump & Valve CO., Lid.
    Saitai solenoid valve Contact Saitai
    Shanghai Fengqi Industrial Development Co., Ltd.
    FengQi solenoid valve Contact FengQi