Hot Product

Product drawing»

Structural drawing»

You are here:  

solenoid valve is divided into common-purpose form

2012-05-11

Solenoid valves are electromechanical valves. This is to imply that the valve is triggered by the functioning of the solenoid. And for the solenoid valve by itself, the important portion is the solenoid coil (a coil of wire). The wire would be magnetized when the electricity works by means of it. Then the enthusiasm is gotten. Additional cooperating parts are electrical connector, bonnet nut, seal cartridge, O-rings, end connector, body and union nut.

Generally, the solenoid valve is divided into common-purpose form, low-pressure steam type and the high pressure steam type. On selecting the appropriate valve, we had greater keep in mind our principle is to choose a valve with manufacturing competence and economical advantages. We should take a careful consideration with the types of the thermo motor, the necessary precision, the pressure, the flow capacity and the failing level and so forth. To buy a quality valve at fine cost is admired.

Since it is an auto system, we must ensure that all the components should work properly. Or else, it is foolishness. To be able to work well, normal care should be taken care of as to direct the solenoid valve to work at its finest. As time goes by, it is sure that certain injuries would be gotten. It is not so significant if the examining work has been down carefully all the time. In the beginning, we should have an obvious knowledge of the whole functioning system. After that, for the particular components, we drive our focus to understand some common malfunction. It would help us to find the issue and resolve it when possible. Furthermore, it is wise of us to do some document regarding the problems and solutions. By executing this, it does great favor to our normal maintain. In addition, as the solenoid valve develops, we are prepared to substitute the old ones.

How Solenoid Valves Work
Solenoid valves are electrically actuated to either their open or closed situation. The valve elements work by allowing or restricting liquid flow depending on whether or not they are matter to an electrical current. The trigger device is normally an electromagnet coil, which stimulates when fed an electric current, attracting a plunger or other valve stem component to changing the state of the mechanical device; this consequently enables or avoids liquid flow. When the electromagnet is deactivated, the plunger is returned to its original position typically by means that of a return spring.

More products of valves

Ball Valves

Check Valves

Gate Valves

Butterfly Valves

Reducing Valves

Shanghai MeiYan Yi Pump & Valve Co., Ltd.
MeiYan Yi solenoid valve Contact MeiYan Yi
Shanghai Enine Pump & Valve Co., Ltd.
Enine solenoid valve Contact Enine
Shanghai Saitai Pump & Valve CO., Lid.
Saitai solenoid valve Contact Saitai
Shanghai Fengqi Industrial Development Co., Ltd.
FengQi solenoid valve Contact FengQi