1.Solenoid Valve is can not be installed anti, usually using "arrows" to indicate the medium flow direction on the body, the installation should in accordance with "Arrow" indicates direction.
2. generally the solenoid valve electromagnetic coil components should be masatate up, perpendicular to the pipe, some products have special requirements, please click to install instructions.
3. Connecting pipe should pay attention to, sealing materials can not be used too much. Such as the threaded connection, the connecting pipe thread should be kept in the effective length, and at the half-pitch of the end using FILE chamfering, from the two teeth part of end twines sealing tape, or excessive sealing tape or adhesive seals will enter the solenoid valve and occurs the accident of hinder normal operation.
4. Solenoid Valve installing part should has a certain reserve space for its daily maintenance and regular maintenance.
5.. When installation, using wrench or pliers to fix the body, then screw on the receiver, it can not be force acting on the coil components which will cause deformation, so that solenoid valve will be difficult to work properly.
6.. Under the conditions of piperigid shortage, or water hammer phenomenon, please using support to fix well before and after valve connecting pipes.
7.. when used in the freeze places, using the insulation material to protect the pipeline or setting heater on the pipeline.
8. To confirm that the solenoid valve and the junction of connecting pipe whether with leakage.
9. The coil pinout connection should be verified, in particular the three-pinout occasions.
10. the electrical components Connects to solenoid valves, such as relays, switches and contacts, etc. when opening valve, the contactor should not vibrate, or will be unreliable and affect the solenoid valve life.

More products of valves

Ball Valves

Balance valves

Gauge Valves

Reducing Valves

Forged Steel Valves