High temperature high pressure magnetic valves
product drawing
High temperature high pressure magnetic valves
Purpose and structure characteristics
use
This valve is the pilot direct acting solenoid valves, the medium a
wider range, can use in water, light oil, heavy oil, noncorrosive gas
and steam etc, such as power flow pumping gas pipeline hydrophobic
systems and exhaust systems, evaporator is mainly the medium of the
pipeline to automatically adjust the position and the remote control.
Structure characteristics
High temperature resistant: using metal hard seal, improve the use of temperature. The media fluid temperature can reach 425 °
Wear-resistant materials: reasonable, valve and guide suites ingenious use of fluid lubrication and reduce wear.
Using lever principle that coil and body completely isolated
Structural principle
Electromagnetic valve electromagnet power on,drive shaft rotation by
ascending connecting rod, vice valve is opened. Because of the open,
upper pressure fluid of the cup valve expelled, for the valve cup bottom
pressure higher than that of the main valve, main valve cup will be
pushed upward. The main valve is opened up, pressure equal, in the
electromagnetic force, and cup is on balance, the valve is opened. When
outage, the bit under gravity and spring returns effect , shut down vice
valve, the valve cup upper pressure rises and depress main valve cup,
reach flow shut off the valve sealing function.
Scope of application
Space and shipbuilding industry, petrochemical, metallurgical industry,
electric equipment, power, biopharmaceuticals, industrial furnaces,
drying equipment, hvac, plating coating, wine and food industry, rubber
and plastic machinery, etc
temperature medium : ZCZG≤50 ZCZH≤400
The nominal pressure (MPa) ZCZG 2.5 ZCZH 4.0
Differential pressure (MPa) ZCZG 0.1-2.5 ZCZH 0.1-4.0
Nominal diameter (mm) 10 15 20 25 32 40 60 65 80 100
Environmental temperature: - 20 ~ + 60 ° c,
Protective level: international standard IP54
Pressure rating: PN0-4.0 MPa
Power: 0.15KVA 0.46KVA 0.15KVA
the power voltage AC220V other specification can be made special orders
The rated flow coefficient (KV) : by JB/T7352-94
Leakage (m/min) : according to JB/T7352-94•F
Principle: pilot piston type
Body material: carbon WCB
Sealing material: PTFE, copper
Control mode: normal closed, normal open type
Standard voltage: AC220V DC24V and voltage (other special)
Fluid scope: hot water, steam, heat conduction oil etc. high temperature
and high pressure medium or normal temperature high pressure medium
Interface flange connection mode: flange
Material: carbon steel
Dimensions & constructral diagram
High temperature high pressure dimension drawing