A gas solenoid valve is a type of solenoid valve designed to control the directional flow of gas. These valves are used in applications where gas is a necessary component of the appliance, such as in the case of gas stoves, industrial burners, and many other industrial applications. A gas solenoid valve can control the flow rate and direction of a gas, preventing gas overload and even explosions. The operation of solenoid VALVES is not all easy. There are several problems that commonly arrive with the valves, mostly due to the wrong valve chosen for the job. Identifying these common problems can help avoid serious problems in your factory.

Over rating: The pressure rating on the valve is designed to operate at about 10 percent higher or lower than the rating on the valve. Choosing a valve with a much higher rating when it is not necessary can actually cause more problems with the unit. Always choose a valve that has a close rating to the actual pressure output of the unit.

Flow misunderstandings: a two-way flow valve is designed to direct the gas in one direction only. If you need the gas to flow in two directions, then you have to switch to a bidirectional gas valve in your unit.

Valve contamination: This is less an issue with gas valves, but it can still occur. Installing a valve in a horizontal position can lead to contaminants building up inside the valve. When the valve is full of contamination, it will reduce the flow rate, which can lead to serious problems. Try installing the valves in a vertical position when possible.

Incompatible replacements: Most gas valves are designed to work with specific brands. If you use a different brand’s parts along with the valve, this can lead to problems, including leaks and explosions. Always try to match brands for the best results.