BS 1640-1-1962 Specification for steel butt-welding pipe fittings for the petroleum industry – Wrought carbon and ferritic alloy steel fittings

BS 1640-4-1968 Specification for steel butt-welding pipe fittings for the petroleum industry – Wrought and cast austenitic chromium-nickel steel fittings – Metric units

BS 3868-1995 Specification for prefabricated drainage stack units in galvanized steel

BS 416-1-1990 Discharge and ventilating pipes and fittings, sand-cast or spun in cast iron – Specification for spigot and socket systems

BS 460-2002 Cast Iron rainwater goods – Specification

BS 4677-1984 Specification for arc welding of austenitic stainless steel pipework for carrying fluids

BS 5667-5-1979 Specification for continuous mechanical handling equipment – safety requirements – Loose bulk materials: couplings and hose components used in pneumatic handling

BS 569-1973 Specification for asbestos-cement rainwater goods

BS 759-1-1984 Valves, gauges and other safety fittings for application to boilers and to piping installations for and in connection with boilers – Specification for valves, mountings and fittings

BS 7892-2000 Specification for seal coats on cement mortar lined ductile iron pipes and fittings

BS 864-3-1975 Capillary and compression tube fittings of copper and copper alloy – Compression fittings for polyethylene pipes

BS EN 10329-2006 Steel tubes and fittings for onshore and offshore pipelines – External field joint coatings

BS EN 12107-1998 Plastics piping systems – Injection-moulded thermoplastics fittings, valves and ancillary equipment – Determination of the long-term hydrostatic strength of thermoplastics materials for injection moulding of piping components

BS EN 12117-1998 Plastics piping systems – Fittings, valves and ancillaries – Determination of gaseous flow rate/pressure drop relationships

BS EN 12585-1999 Glass plant, pipeline and fittings – Pipeline and fittings DN 15 to 1000 – Compatibility and interchangeability

BS EN 14424-2005 Hose fittings with screwed ferrules

BS EN 14901-2006 Ductile iron pipes, fittings and accessories – Epoxy coating (heavy duty) of ductile iron fittings and accessories – Requirements and test methods

BS EN 274-2-2002 Waste fitting for sanitary appliances – Test methods

BS EN 295-6-1996 Vitrified clay pipes and fittings and pipe joints for drains and sewers – Requirements for vitrified clay manholes

BS EN 295-7-1996 Vitrified clay pipes and fittings and pipe joints for drains and sewers – Requirements for vitrified clay pipes and joints for pipe jacking

BS EN 545-2002 Ductile iron pipes, fittings, accessories and their joints for water pipelines – Requirements and test methods

BS EN 598-1995 Ductile iron pipes, fittings, accessories and their joints for sewerage applications – Requirements and test methods

BS EN 60423-1995 Conduits for electrical purposes – Outside diameters of conduits for electrical installations and threads for conduits and fittings

BS EN 682-2002 Elastomeric seals – Materials requirements for seals used in pipes and fi ttings carrying gas and hydrocarbon fluids

BS EN 713-1995 Plastics piping systems – Mechanical joints between fittings and polyolefin pressure pipes – Test method for leaktightness under internal pressure of assemblies subjected to bending

BS EN 714-1995 Thermoplastics piping systems – Non-end-load-bearing elastomeric sealing ring type joints between pressure pipes and moulded fittings – Test method for leaktightness under internal hydrostatic pressure without end thrust

BS EN 804-1995 Plastics piping systems – Injection-moulded socket fittings for solvent-cemented joints for pressure piping – Test method for resistance to a short-term internal hydrostatic pressure

BS EN 877-1999 Cast iron pipes and fittings, their joints and accessories for the evacuation of water from buildings – Requirements, test methods and quality assurance

BS EN 969-1996 Specification for ductile iron pipes, fittings, accessories and their joints for gas pipelines – Requirements and test methods

BS EN ISO 12162-1996 Thermoplastics materials for pipes and fittings for pressure applications – Classification and design – Overall service (design) coefficient

BS EN ISO 1746-2001 Rubber or plastics hoses and tubing – Bending tests

BS EN ISO 6708-1996 Pipework components – Definition and selection of DN (nominal size)

BS EN ISO 8795-2002 Plastics piping systems for the transport of water intended for human consumption – Migration assessment – Determination of migration values of plastics pipes and fittings and their joints

BS ISO 10147-2005 Pipes and fittings made of crosslinked polyethylene (PE-X) – Estimation of the degree of crosslinking by determination of the gel content

BS ISO 10838-1-2001 Mechanical fittings for polyethylene piping systems for the supply of gaseous fuels – Metal fittings for pipes of nominal outside diameter less than or equal to 63mm

BS ISO 10838-2-2001 Mechanical fittings for polyethylene piping systems for the supply of gaseous fuels – Metal fittings for pipes of nominal outside diameter greater than 63mm

BS ISO 10838-3-2001 Mechanical fittings for polyethylene piping systems for the supply of gaseous fuels – Thermoplastic fittings for pipes of nominal outside diameter less than or equal to 63mm

BS ISO 15840-2006 Ships and marine technology – Standard specification for thermosetting resin fibreglass pipe and fittings to be used for marine applications

BS ISO 16132-2004 Ductile iron pipes and fittings – Seal coats for cement mortar linings

BS ISO 16241-2005 Notch tensile test to measure the resistance to slow crack growth of polyethylene materials for pipe and fitting products (PENT)

BS ISO 4179-2005 Ductile iron pipes and fittings for pressure and non-pressure pipelines – Cement mortar lining

BS ISO 727-1-2002 Fittings made from unplasticized poly (vinyl chloride) (PVC-U), chlorinated poly(vinyl chloride) (PVC-C) or acrylonitrile/butadiene/styrene (ABS) with plain sockets for pipes under pressure – Metric series

BS ISO 727-2-2005 Fittings made from unplasticized poly(vinyl chloride) (PVC-U), chlorinated poly(vinyl chloride) (PVC-C) or acrylonitrile/butadiene/styrene (ABS) with plain sockets for pipes under pressure – Inch-based series

BS ISO 8085-1-2001 Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels – Metric series – Specifications – Fittings for socket fusion using heated tools

BS ISO 8085-2-2001 Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels – Metric series – Specifications – Spigot fittings for butt fusion, for socket fusion using heated tools and for use with eletrofusion fittings.

BS ISO 8085-3-2001 Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels – Metric series – Specifications – Electrofusion fittings.

BS ISO 8179-1-2004 Ductile iron pipes – External zinc-based coating – Metallic zinc with finishing layer.

BS ISO 9349-2005 Preinsulated ductile iron pipeline systems.

MORE NEWS